Micro-Scientific Micro-Cide28 HLD Disinfectant MC28-04-128 Case
A USA-based company, Micro-Scientific® continues its more than 35 year tradition of supplying and marketing products used for the prevention of microbial transmission and cross-contamination. Cutting-edge technology is a number one priority at Micro-Scientific®, and is maintained through ongoing research and development programs with guidance from highly qualified expert consultants in the areas of microbiology, immunology, infection control, chemistry, medicine and other scientific disciplines. Monitoring by, and close contact with governmental regulatory agencies such as the U.S. Centers for Disease Control (CDC), U.S. Environmental Protection Agency (EPA), U.S. Food and Drug Administration (FDA), Health Canada (HC), Occupational Safety and Health Administration (OSHA) and U.S. Department of Transportation (USDOT), Micro-Scientific® assures that its products meet the newest, up-to-date guidelines and regulations. Micro-Scientific® follows strict ISO 9001 and ISO 13485 quality controlled manufacturing guidelines. Our goal is consistently meeting or exceeding our customers’ expectations, and we are committed to providing the highest quality products to our customers. Weiman® Healthcare has become Micro-Scientific™. Though the name has changed, we will continue to offer the same great formulas and services.
- Produces high-level disinfection at room temperature in as little time as 25 minutes and complete sterilization in 10 hours at room temperature, nearly twice as fast as the leading glutaraldehyde
- Once activated, Micro-Cide™ 28 HLD can be used for 28 days to provide high level disinfection or sterilization, providing the solution is above the 1.8% minimum effective concentration and is used according to directions for use-see note below
- High level disinfection of instruments in 25 minutes providing directions for use are followed
- Sterilizes instruments in 10 hours providing directions for use are followed
- A virtually surfactant-free, free rinsing activated glutaraldehyde liquid chemical sterilant and high-level disinfectant
- The active ingredient is glutaraldehyde in a nominal concentration of 3%
- Moderate pH compatible with heat sensitive scopes
- When the powdered activator is added, the solution turns green in color to indicate its readiness for use
- The ready-to-use solution contains buffers, wetting agents, a rust and corrosion inhibitor and a pleasant fragrance
- Representative microorganisms tested include: Bacterial Spores-Bacillus subtillus,Clostridium sporogenes, Vegetative Bacteria-Staphylococcus aureus, Salmonella cholerasuis, Pseudomonas aeruginosa Mycobacteria-Mycobacterium tuberculosis (var:BCG bovis), Mycobacterium tuberculosis (smegmatis) Viruses-Herpes simplex virus Type I, Poliovirus Type I, HIV-1 (Associated with AIDS)Fungi -Trichophyton mentagrophytes, Aspergillis Niger
- WARNING: This product can expose you to b-Myrcene, which is known to the State of California to cause cancer
- Case of 4 gallons
- see Micro-MEC M60054 for the 60 Test Strip Bottle
- Made by: Micro Scientific
- Manufacturer's Product Number: MC28-04-128
Reprocessing flexible fiber endoscopes in-use studies supports the effectiveness of Micro-Cide™ 28 HLD in actual use. (ASTM 1518-94 protocol). In addition, a simulated use-test was conducted to support the contact condition for high-level disinfection of endoscopes at 25°C at 25 minutes. The results demonstrate the effectiveness of Micro-Cide™ 28 HLD to kill M.Terrae dried on flexible fiber endoscopes. (Studies were performed after 28 days of simulated re-use following prescribed AOAC testing methods).
Micro-Cide™ 28 HLD 3% Glutaraldehyde may be reused for a maximum of 28 days provided the minimum effective concentration of 1.8% Glutaraldehyde, time and temperature are maintained. Micro-MEC™ 1.8% Glutaraldehyde Monitor Strip* should be used before each use of Micro-Cide™ 28 HLD 3% Glutaraldehyde solution to determine the glutaraldehyde concentration is above the minimum effective concentration of 1.8%. Do not use beyond 28 days even if the concentration of Glutaraldehyde is above the minimum effective concentration (1.8%) as indicated by the Micro-MEC™ 1.8% Glutaraldehyde Monitor Strip*. See the Package Insert for additional instructions and information regarding the reuse of Micro-Cide™ 28 HLD 3% Glutaraldehyde.
*Please note the manufacturer only provides a stock image for this product group. The product appearance may be different. The specific product details are listed in the description.
